Technology Solutions for Everyday Folks

Tagged with 'tech'

Using Powershell to Send a Teams Notification from a Task Sequence Step

Screen snip of a completed task sequence Teams notification

The last two posts were inspired by conversations at MMS Flamingo and focus on using Slack as the communication/receiver for notices relayed from a Task Sequence step and

Read More

UPDATE: Direct Slack Notification From a Task Sequence Step

Screen snip of a completed task sequence Slack notification

Last week I wrote about a basic process I have in place to fire off a Slack notification when a Task Sequence completes.

Read More

Triggering a Slack Notification on Completion of a Task Sequence

Screen snip (sanitized) of a completed task sequence Slack notification

A number of years ago I started having my primary OSD Task Sequences "check in" as one of their last steps. Specifically check in with key information so I can follow up as necessary ("trust but verify") with downstream actions to ensure our asset management systems are properly updated.

I chose a Slack webhook to accomplish this as I could set up a quiet channel for notifications and queue them for later review (once a day or a few times per week).

Read More

Creating a Generic OAuth Token Request to Microsoft Graph API

After spending much of the month of August on a European vacation, I'm back and preparing for my sessions at MMS Flamingo Edition coming up in October. The last couple weeks I've been working on demos for my Admin Service and Graph API session in which much conversation (and many demos) will take place working with "read-only" data from both of these services to empower T1 folks.

Read More

Exporting Full MySQL Database Tables on Ubuntu

...or, How I Suffered Through an 'If it Can Go Wrong, it Will Go Wrong' Scenario for a One-Off Export of Database Tables

This is one of those posts I'm writing up because in the moment I was so incredibly frustrated about how unnecessarily complex this action was, and I still have the various browser tabs that ultimately provided me the necessary bits open. I write this mostly for Future Me should I need to do something like this again.

Read More

Basic Dialog to Manually Name OSD Task Sequence Device

Many years ago I wrote about the way I automatically generate the OSDComputerName value for most devices in my fleet. Much of that process remains as it did back then, but I've never written about how I handle the one-offs (such as my testing VMs or other nonstandard hardware).

Read More

Manually Pointing Windows Activation At Alternate KMS Host

Screen snip of a successful Windows 11 Enterprise KMS Activation

If you work with a lot of disparate dev and test devices across different domains, tenants, etc., you might run into the sort of Windows activation issue I encounter. In particular, when I'm doing dev/test work using physical hardware in my lab space (for things like OSD or OSDCloud), these machines wind up managed by my dev/test tenants/environments, and thus not pointing at our production KMS server for Windows activation.

Read More

Setting Up SSH Key Authentication: 2024 Edition

A recent project I worked on required setting up more SSH key authentication, and seeing as how I'd not written about it for two years since the last iteration, it seems fitting to do another quick primer on setting that up for SSH...the 2024 edition.

Read More

Getting Started with WSL - A Quick Installation Guide

Snip of Ubuntu 24.04 LTS in the Microsoft Store.
  • April 29, 2024
  • 4 minutes
  • tech

I've been using the Windows Subsystem for Linux (WSL) almost as long as it's been generally available, and I use it for all sorts of things. As I prepare for my upcoming sessions at MMSMOA, specifically the "happy hour" session I'm hosting with Jeff, I am setting up some new instances of WSL on clean hardware (both physical and VM) and figured it'd be a good opportunity to note the (usually) quick steps to get a basic installation of Linux up and running.

Read More

Automatically Process and Send Google Form Responses on Submission

Screen snip of a dynamically generated PDF from Google Form submission

I haven't written anything up about Google stuff in a while, and since this topic came up a few times in as many weeks (including from conversations at BrainStorm K20) I figured it's time to share the solution I've used several times.

Read More

Creating a Differential Sensor In Home Assistant

Home Assistant Gauge Card indicating a temperature differential

If you've fiddled enough in Home Assistant over time, you might have encountered the situation in which it is useful to trigger off of, or simply display, a calculated value. There are a few different ways this can be accomplished but this post focuses on creating a specific sensor to do both: be used as a trigger value for automation, and also displayed neatly in a dashboard.

Read More

Belated Farewell to the Twitter/X API

"dead Twitter" bird icon: an upside down Twitter bird with an X where the eye would be.
  • February 12, 2024
  • 2 minutes
  • bots, tech

This isn't much of a "real" post, and admittedly I needed a filler for this week, but it's been on my list to write about here for a while: Last summer I shut down my three Twitter bots when the Twitter API moved to a ridiculous new access rate structure.

Read More

Export CM Collection Member Details to CSV

A script snippet I use all the time (and which gets a lot of search traffic) is something I wrote in 2020 about exporting AD computers to CSV with Powershell. Along those lines, another cmdlet I use all the time … usually for inventory/asset management … is to obtain collection data from the SCCM/MEMCM/MECM/CM ecosystem.

Read More

Lighting the Dark Days of Winter with Home Assistant

Screen snip of two settings in Home Assistant for Light state and a script trigger

This fall, right after the time change, I found myself often working intensely enough to suddenly notice "it was dark outside" in the late afternoon. Good for productivity, I suppose; not so much otherwise? ¯\_(ツ)_/¯

I'd automated a whole bunch of other light situations, mostly with some combination of brightness level (obtained from my Tempest weather station) and/or time-based. But all of those solutions were "binary" (on/off). My thought here was to slowly and incrementally bring up the overhead smart lights in my home office space.

Read More

Reflections on Advent of Code 2023

Screen snip of a portion of the AoC "map" for 2023

I finally gave Advent of Code a shot for 2023! In years past I'd think about/stumble across/remember it a week or two in and automatically 'nope' out of starting. This year, in large part due to the WinAdmins Discord, I was both reminded of it in advance and also had a small community of other folks taking part (and a private leaderboard to watch).

Read More

OctoPrint Webhook for Filament Change Notifications

I've been using OctoPrint to handle nearly all of my 3D printing operations since I moved to it a little over a year ago. It's an absolutely wonderful platform and I can't recommend it enough.

Read More

Hotend Thermistor With A Silpat, Revisited

I decided to post a quick follow-up to the original fix I'd implemented about ten months ago.

The $1M question was...

Read More

Back to a Regular Schedule?

Gif of a "retro" television powering up to a white screen/noise.

Man, it's embarrassing to see that I haven't published anything really technical (beyond my MMS Miami Beach recap) since the end of July...and before that anything on a regular schedule since April! Despite my best intentions, some aspects of life got complicated. Fortunately in the "good" way, but it really cut into my time to think about and craft posts.

Read More

MMS Miami Beach Recap

Rudy (at left) and Matt take a quick picture from the speakers' angle of the "Big Room" at MMS Miami Beach as we begin our 8 a.m. session.

I had the great honor and pleasure of being a speaker at MMS Miami Beach Edition at the end of October. It was the first speaking event I've had since 2019, largely due to the pandemic, and the experience was marvelous! The entire team behind MMS is outstanding, and their attention to detail really makes a difference in the experience both for attendees and speakers.

The Overall Experience

The speaker attire this edition was pretty rad: lots of flamingo gear!

Read More

Enabling Pi-hole DNS Across Multiple VLANs

Screenshot of the "Top Clients" dashboard box of the Pi-hole admin interface, showing six clients with their local dns addresses and activity.

I recently (and finally) upgraded my home network to a UniFi system after years of consideration and an incorrect assumption it would cost a small fortune to enact. My existing "core" router was reaching the end of its normal life, though, and I wanted a real mesh network with better outdoor coverage instead of using the range extender during the "not winter" months and connecting to a different SSID.

Read More

Turn off the fan already! Tales of an automation modification

Snip of details when creating a Home Assistant helper entity for a timer object.

It's been a couple months since my last post, and while I had some things in the queue I have lacked time to finish them out due to MMS in early May, being involved in a community theatre production that just wrapped up a couple weeks ago, and for random reasons building a chicken coop of all things. ¯\_(ツ)_/¯

Here's to a return of more regular posts, assuming I have adequate time to write and revise them!

Read More

Addressing Firmware Updates for Dell Latitude 54X0 in a Task Sequence

Screenshot of a child task sequence for updating firmware in Full OS mode, with a Run PowerShell Script step highlighted with package and script information.

For about two years we fought with getting firmware (BIOS) updates to install on our Dell Latitude 54X0 models during their build/rebuild using a MEMCM task sequence. No matter what random trick I tried or thing I read, I just couldn't get the update executable to successfully apply the update in our primary build/refresh task sequence. Our techs (self included) would have to apply the update manually after devices were [re]built.

Read More

Semi-Automatically Offering Dell BIOS/Firmware Updates

Photo of Dell firmware update in progress instructing a user not to power down the system and showing a progress bar with basic status information.

Several years ago I implemented a mechanism in our primary [re]build [Configuration Manager/MEMCM/SCCM] task sequence to address upgrades of our fleet's firmware (BIOS). On the whole, the process has worked very well and definitely helped keep things updated. However, this process only upgraded device firmware during a [re]build cycle which works great for our multi-user devices receiving an annual refresh; for high-affinity devices a rebuild happens once every 3-5 years and is usually associated with some form of attrition or replacement.

Read More

Creating a Reference Sensor Template in Home Assistant

Snip of a Home Assistant Dashboard item identifying two sensor states: one for bathroom humidity at a level of 44.6% and another for bathroom humidity target at level 49.0%.

It's been a while since I wrote about any Home Assistant stuff so I figured this was as a good time to write about something I'm super happy with: custom/reference sensor templates!

Read More

Going Dual Camera with OctoPrint

Almost as soon as I started using OctoPrint, I also set up an old webcam to let me remotely "see" things since I keep the printer in the basement. That whole process was an adventure, because I don't use a Raspberry Pi for OctoPrint like most folks; I have an old Intel NUC (also used as a local dev server) running Ubuntu on which I installed OctoPrint. To that end, I had to do some manual install/build of the mjpg-streamer, specifically I used this package to get started.

Read More

Creating a Practical and Automatic Server and Data Backup Solution

If you had disk/storage failure (on any of your important devices/things/places), would you be "up the creek?"

For many folks, the answer to that question is "absolutely."

Read More

Upgrading All The Things to Ubuntu 22.04

One of my "winter break" projects this year was to get all of my disparate Ubuntu server instances upgraded and into parity. Last year I wrote about my adventure moving WSL Ubuntu from 18.04 to 20.04, which happened before 22.04 was officially released. In that process I noted the longer-term target of moving to 22.04 which brings us to the here and now!

Read More

Mister Thermistor, Fixed With a Silpat

Screenshot of OctoPrint's temperature graph illustrating a consistent hotend and heated bed temperature with only minor +/- 0.5 degree variations over the course of the previous 30 minutes.

I got hooked into 3D printing late last summer. A problem that cropped up after the first couple months of tinkering and relatively error-less printing was an issue with thermal runaway. Something I could correct for short periods of time, but never make totally go away...

Read More

Powershell String Manipulation - A One-Liner

See also: asking a friend for help can save oodles of time and effort.

Around Thanksgiving 2022, an friend of mine asked to talk through a problem he thought might be solvable with Powershell, but he'd been stuck on the design. Naturally, I agreed to help out if/where I could and it provided an opportunity to chat via Zoom which I am not one to turn down.

The Problem

In this case, there's a relatively free-form bunch of text received from a person/process whose behavior is unlikely to change. A couple of things that are consistent in this data:

Read More

Smart Independent Control of a Ceiling Fan & Light with Shelly 1L

Home Assistant dashboard (dark mode) illustration for independent control of office fan and office lights, with office fan in "off" state and office lights in "on" state.

As I've noted before, my 1940's-era house has its own quirks with regard to smart home automation in large part due to 1940's wiring standards.

Read More

Smart Control of a 1940's Three-Way Switch with Shelly 1L

Snip of Home Assistant dashboard card for Stairwell/Stair Lights with status data

Once I settled on jumping into home automation and Home Assistant (HA), the first "practical" thing I wanted to address was the issue of lights being left on at random throughout the house. Some fixtures were greater offenders than others, but with a control mechanism like HA I could actually begin to address what others wouldn't.

Read More

Jumping into Home Assistant: The Installation (and Hiccup) Process

Screenshot of Home Assistant Initialization/Setup Screen at the user account creation step

About a month ago, I took the plunge.

After considering it for a long time and hearing about some cool stuff folks were doing with home automation, I decided it was time to start my own dabbling adventure. A warning to folks: home automation is a little bit like owning horses. There can be a bunch of expense in the process for little obvious reward.

Read More

Adding Push Notifications to the Tempest WeatherBot

Slack Tempest WeatherBot alert notification for a close lightning strike

This is the "final" installment of my summer 2022 blog series about the development of my Slack Tempest WeatherBot.

Read More

Adding External Data to the Tempest WeatherBot

Slack Tempest WeatherBot in-channel alert notification from NWS API data for a Dense Fog Advisory

This is the third in the short series of my journey building the Slack Tempest WeatherBot. In this post I'm walking through the steps to incorporate external data from the National Weather Service (NWS) API for alerts and forecast options.

Read More

Expanding Interactivity with the Tempest WeatherBot

Slack Tempest WeatherBot App Home tab display with current conditions and daily statistics

In the last post I wrote about the basics of building the Slack Tempest WeatherBot and its basic set of command arguments. This post builds on those commands with an overview of expanding the Slack interactivity by adding a bot app home tab.

Read More

Creating a Slack Bot for Tempest Weather Station

Image of Tempest weather station with device features highlighted

In summer 2020, I picked up a WeatherFlow Tempest station...a purchase I'd been considering for the better part of a year. It's an awesome and compact little thing, and on the whole I've been super happy with it. In my location it tends to over-report rainfall as the haptic rain sensor is also sensitive to vibrations on the mounting point (a pole in my yard).

Read More

DMARC: Moving to a Monitor-As-Necessary State

After a year-and-a-half of implementation (mostly monitoring), it is time to switch to a 'steady' or 'monitor-as-necessary state' for all of my things DMARC. I've written about this journey before, with the last major summary in November, 2021.

Read More

Upgrading an Old Application to 21st Century Passwords

I have a confession to make: I've ignored a Really Bad Password Form on an inherited web application for about at least a decade too long.

I'm not proud, but every time I considered changing the password mechanism to something more modern (and more secure), decision paralysis would set in...in great part due to the design challenges I anticipated in quietly upgrading this for users of the app in question.

Read More

An MMS 2022 Recap

Gif of 'secret' high-five handshake between characters Abed and Troy from the series Community

Two weeks out from the last MMSMOA and the technical overload hangover lingers on...but in a Good Way. This post isn't terribly original, but it's my own highlights/recap/pitch of MMS.

Read More

The MMSMOA Retweet Bot in Action

Cartoon robot image of the @mmsmoabot with breastplate advertising MMS and the bot Twitter handle

Hot on the heels of last week's triumphant return of the "MOA" edition of MMS, I'm writing up a post-conference review of my somewhat-accidental creation: the MMSMOA Retweet Bot.

I shared the bot's story with a number of folks during the conference, often while peddling the bot's stickers, but several folks also encouraged me to share the details via blog post as well so here it is!

Read More

In-Place Upgrade of WSL Ubuntu 18.04 to 20.04

About two months back (early March to be exact), I had the opportunity to finally deprecate some old versions of applications and packages due to planned retirements and upgrades. Most specifically a full-on move to PHP 7.4 was in sight, though there were other bits. I run and have access to a bunch of different environments so it felt right to get environments back to a standard (or at least closer) base configuration.

Read More

Improving DMARC Compliance: Authenticated SMTP Relay

I've done a lot of server migrations for very unrelated reasons over the last six months or so. Many of these host applications that send emails, and I've implemented the basics to get them sending DMARC-compliant messages. This has generally been limited to DNS SPF records for each host configuration. Generally speaking, having SPF or DKIM compliance is 'enough' to get your messages not flagged as spam, though it can depend on the DMARC policy configuration.

Read More

LAMP to WAMP: Adventures in Server Migration

Server migrations are an inevitable task, but I found myself in a different than normal circumstance recently. A planned server stack retirement, combined with the server "owner's" technical capacity and expertise required a change in platform. Specifically, this shift meant moving from Linux to Windows.

Read More

Certbot on Windows: Automation Is Possible

A recent project gave me an opportunity to try out Certbot on Windows. As I've written about before, I've had an extensive journey with Certbot, at times in fairly 'non-standard' configurations, and Certbot on Windows is no different.

Read More

Revisiting Key Authentication Setups

Nearly 18 months ago I wrote about setting up and using key authentication to connect between hosts. I use it all the time and it's a major timesaver on all sorts of levels.

Read More

Moving an Old Website to Github Pages: Creating a Finished Product

 In the last post I wrote about the process of creating the layout and the challenges through the content conversion and basic layout stages. This post works through some of the fine-tuning and the process of "going live" with the new site and its structure.

Read More

Moving an Old Website to Github Pages: Getting Started

Nearly 25 years ago I spun up a website featuring transcriptions of Monty Python material collected from college students in the 1980s. I don't remember how I came across the archive of these text files, but I still have the originals in part of my personal digital archive. Around the year 2000 I moved the website (and subsequently added more content) into a Wiki system (TWiki, to be exact).

Read More

Drupal Site Improvements and other Housekeeping

On the heels of (and riding the wave following) my recent migration of Drupal to a new server host, I decided it was well past time to finally address some things with my Drupal instance that were been bugging me for a long time. Of course, something like this often spirals into its own set of "other" things to fix for the greater good.

Read More

Moving a Legacy Drupal Stack to a New Server Host

One of my "end of 2021 break" projects was a planned "lift and shift" of my primary Drupal instance to a fresh, sparkly new web host stack. The stack on which it resided was reaching end of life and for a few other reasons it was time to make the change. In preparation, over the last year or so I've been de-coupling and untangling some of the baggage that had accumulated on the old server and its structure over time. Relatively simple things like straightening out, consolidating, or consistently applying vhost configurations.

Read More

Reconciling Disparate Datasets

A few weeks ago I was asked to help update a centralized inventory dataset, which to us is definitely a "tertiary" system. Several hundred device records were associated with our part of the organization, and every time I opened the list I quickly "noped" out of doing anything with it. But the time came when I needed to actually do something with it lest I wind up on someone's naughty list.

Read More

DMARC: Time to Evaluate Reports

Almost exactly a year ago, I wrote about my first foray into implementing DMARC controls. Specific to domains through which email was not intended to be sent, it was the beginning of my DMARC adventure and expansion into some 35-ish domains.

This became its own series of posts with time:

Read More

Date Math is Gross

This year, I'm working with/mentoring a paid intern on a device monitoring project for a portion of our fleet. These sort of projects are always fun and meaningful in that we identify a problem or opportunity to improve, and then solve said problem in a way we've not done before. It works out well for everyone involved because we get an improved process or "thing," the intern gains some practical experience and skills (often with stuff they've never encountered), and the intern gets paid to boot.

Read More

Implementing Certificate Authority Authorization

During the foray into fixing up the Let's Encrypt root certificate expiration bits for my affected bot host, while using the helpful SSL Server Test tool, I discovered the "new" (not really new) Certificate Authority Authorization (CAA) DNS record.

Read More

Keeping the Wireless On - Script the Reconnect

Electric arc between two plasma globes

In our classroom fleet, almost all devices are wireless-only for their network access. This as a design is great for mobility and flexibility and the user experience but presents its own set of very unique challenges on the technical side. At various times and for a wide range of reasons, we encounter the situation where devices "lose" their wireless/Wi-Fi connection. Resolution usually involves dispatching a tech to the space or walking a user through, under most circumstances, simply "reconnecting" to the proper SSID.

Read More

Breaking the Chain: An Edge Case of Let's Encrypt Root Certificate Expiration

It's been written about and announced for some time—the forthcoming expiration of the DST Root CA X3 certificate. The good news for most folks is that it's not a big deal. And that, I thought, also included me. For the most part, this has panned out to be true.

Read More

A DMARC Follow-Up: Nine Months In

It's been a full nine months since I first wrote about implementing DMARC controls, and over six months since I last wrote about fiddling with DMARC settings, so it's time to provide another quick update.

Read More

Undo the Undo -- A Short Tale of a Git Mistake

Gif with "Abort the mission" text.

I had one of those "Oh shit, Git!" moments this past weekend...

Mine was that I made a necessary change, and since it was pretty minor (really a typo fix of sorts) I just went ahead and did it in the main branch. NBD. Commit, push, and pull on the remote host, and all is good.

Read More

Whoops! Cleaning up Mistakes via API

Gif with "I've made a huge mistake" as caption.

Posting again after kind of a lengthy break. It's summertime, and for lots of disparate reasons I've queued up topics but haven't had the ambition or taken the time to write them all out. So today we get a tale of automation mistakes and the subsequent cleanup.

Read More

Reinstalling reCAPTCHA

In the last post I wrote about finally cutting off the comments feature due to an abundance of spam.

For about two days, this was successful...

Read More

Comments No More

Well, the time has come...to shut down post comments. Presumably for good.

When I rebooted the site in Drupal a couple of years back, I'd waffled over whether or not to leave post comments enabled. It seemed like an okay idea, but at the same time would they just become a sea of comment spam? At the time of the site reboot, though, I chose not to maintain an active direct contact ("contact us") form due to other technical limitations at the time. So comments seemed an appropriate balance.

Read More

Cleaning Up Old Mistakes Part Deux: Leveraging Includes

This post is the second of a two-part miniseries identifying and correcting old mistakes. Part one discusses cleaning up Git repos based on permissions faux pas.

Today's atonement for old mistakes: Using centralized/standard "includes" for path variables and eliminating passwords from committed code.

Read More

Cleaning Up Old Mistakes: Git Repos With Nested Accounts

This post is the first of a two-part miniseries identifying and correcting old mistakes. Part Deux is also available.

Today's atonement for old mistakes: Git repos used in production in which nested/disparate accounts run code.

Read More

A Twitter Bot for Dad Jokes

About a month ago, I discovered this gem of a tweet:

Read More

My Personal Git Cheat Sheet

I've used a number of various Git cheatsheets over the years, usually duing a moment of "how do I do __ again?" and sometimes during a moment of panic like "Shit! Undo that commit!"

Recently, I (finally) "removed my training wheels" and uninstalled the UI client I had for Git, for two reasons:

  1. I was not actually using its features anymore*; and
  2. It was constantly getting in the way of Git updates.

* Save for the occasional git clone action

Read More

Git-ting the hang of Hooks

Several months ago I made the decision to finally use Git to manage a more complex "legacy" web application project that I inherited over a decade ago and continue to maintain. Years ago when migrating the web application to a new hosting stack, I ported the development/test and production sites into their own Git repositories. Thanks to the magic of GitHub, it made the actual migration to a new host pretty simple in that the migration itself (save for the database bits) was more or less a simple git clone action.

Read More

Signing Git Commits: Chasing the "Verified" Stamp

I've been working on projects lately that actually involve writing more code than I have in a while...and so I'm using Git/GitHub with greater frequency than I have in some time.

Read More

Implementing DMARC: Adjusting SPF Records

It's been a couple of months since I last wrote about implementing DMARC and what comes next (review and adjustment). So I figured this would be a good time to document a few changes I've made based on the reporting data received so far.

Read More

My First Twitter Bot: A Journey into Twitter's API

Dancing Robot

Sometime around Thanksgiving/November 2020, I formalized the idea that I would actually build a Twitter bot for the sake of novelty and as an experiment/learning exercise. One night at suppertime, we discussed what might be cool as a bot and those ideas are still on the list as possibilities for the future. Ultimately, I settled on a bot idea that built on some things I've used in the past (Google API) so I wouldn't have to learn All The Things in addition to building a bot and figuring out the Twitter API.

Read More

Exporting Legacy/Archival Emails with Google Apps

At work, we've had a number of folks retire over the last 18 months, and a number of those folks are holders of some significant institutional knowledge and memories. Recently I had the opportunity to work with one of these individuals as they prepared to both hand off information to others, which led me to recall several conversations I've had with my Libraries/archives friends about preserving the "right" subsets of digital messages such as email.

Read More

My Incremental Certbot Panacea

I've written about Certbot more than any other topic in the last 24 months or so, in part because it's been an interesting adventure for me both in helping to demystify SSL certificates, but also because it's been an evolving and incremental process to Make It Better. The first post I'd written in February of 2019 talked about using a web service to generate a Let's Encrypt certificate...good for 90 days...for free.

Read More

Interruptions and Intentionality

Snip of cartoon saying 'Hey, so I just sent you an email about that thing.'

Interruptions: they're everywhere.

Read More

Implementing DMARC for Active Domains: Policy & Review

This is the second post in a two-part series to implement DMARC controls for actively-used domains, where this post focuses on creating and reviewing/adjusting your DMARC policy and controls. Part one reviewed proper DMARC prerequisites and contains information you will need to have in place before creating your DMARC policy.

Read More

Implementing DMARC for Active Domains: Configuring Prerequisites

As a follow-up from my previous post about implementing DMARC controls for unused/alias domains (those not used for actively sending messages), I wanted to write a bit about how to implement basic DMARC controls for those domains actively used to send emails.

Read More

Implementing DMARC on Alias Domains

A few weeks ago I crossed a tweet with some simple instructions for securing your "unused" email domains, specifically the few bits required to implement DMARC controls to prevent Bad Folks from using your domains to send spam emails. The short thread led to an awesome reference by the UK Government on the same process.

Read More

Automating Certbot: A Recap of My Journey

Long winding road

Over the last two months, I've shared what amounts to a four-part "series" of posts walking through my journey of using Certbot for SSL certificate management, with the primary challenge being not having the traditional root-level access on the web server. Those posts are, in order:

Read More

Certbot in Manual Mode with Script Hooks

If you've been following along in the mini series, I've gone over the details of using Certbot in manual mode, then bolting some simple scripts together to improve the process of generating and managing certs, all done with a bit of magic thanks to our old friend key authenti

Read More

Improving Manual Certbot Domain Validation

In my second post about using Certbot in manual mode, I address some of the 'pain points' from the first post: namely the process of scripting together some of the bits to create/renew a certificate and otherwise requiring fewer individual commands be entered (or remembered).

Read More

Moving to Certbot with Let's Encrypt

This is the first post in a short series of posts about automating what one can in an environment that might not support full-automation with Certbot and Let's Encrypt. Technically it's the second post as the first was geared toward setting up key authentication between systems, something that's leveraged significantly in this series.

Read More

Quick Tests of WQL Queries

Recently I was working on a clean-up/improvement project in the MEMCM (SCCM) console which required some WQL query work and updates. In particular, I was fiddling with some collection queries to segment some areas for a process improvement project coming up. That's intentionally vague, because the 'why' in this case doesn't really matter. What does matter is that I needed WQL to give me proper results.

Read More

Quickly Extracting Icons with Powershell

One of the things I both love and loathe is adding the little icon to an advertised deployment in the Software Center console of SCCM/MEMCM. As many have said it in the past, "Pretty Counts" and I wholeheartedly agree.

Read More

Auto-Power On Dell Workstation

Cartoon characters join together with "Let's Power Up!" as a caption.

As we begin another academic year, this time in a pandemic, we're providing more virtual/remote desktop access to computer lab and public-access workstations for those in need. We're starting by using the machines taken out of general service due to physical distancing requirements. These workstations are still powered on, but we've removed their keyboards, mice, and fiddled with their monitor configurations (along with basic signage) indicating they are not in service (at the console/in person).

Read More

Formulas in CSV Files

Bad Magic Trick with a ladle for cooking

A while back I received a call for assistance in helping to streamline an inherited process. In this particular case, an individual had created a complex (but necessary) process to essentially transform and move data between disparate systems. The employee(s) responsible for creating this process had since left, but the process remained and needed to be manually done often enough that it was painful enough for the person now responsible for the process to ask for assistance.

Read More

Setting Up Key Authentication

Hands playing with a set of keys on a ring.

While I was preparing to write an upcoming post about moving directly to certbot from SSLForFree now that they've merged with ZeroSSL, I realized that I'd not actually ever written a post about one of the components I use all the time, including for my new certbot process: public key authentication.

Read More

Pushing Data Into Google Sheets Sheets (Yes, Multiples)

Screenshot of basic sheet including multiple tabs/sheets (Excel)

If you recall from the last tech post about pushing data directly into Google Sheets, I promised a follow-up regarding the process of adding multiple sheets worth of data to a given parent sheet.

Read More

Programmatically Push Data to Google Sheets

Screenshot of a very basic CSV file of gibberish test data

I've written in the past about the ability to ship files to Google Drive via its REST API and PHP, which is a super-cool process in and of itself. In the last few months, I've been moving more and more of our internal data shipping processes to Google Shared Drives for ease of end user access. As folks started working remotely, moving data to Google has solved several support burdens regarding access and such.

Read More

Character-Perfect Fixed Width Import Files

Flintstones Cartoon Sewing Machine

One of my springtime projects at work was to button up a recently-refreshed process to transmit some billing data between systems. By 'recently-refreshed,' I mean 'finally made a process whereby a human doesn't have to manually generate a file which had been the de-facto process for the better part of twelve years. Due to the cascading effects of some staff turnover in the unit in question, IT was brought into the loop to help find a better way to work this process.

Read More

Simple, Yet Powerful Excel/Sheets Functions

Cartoon about functional programming

As a reflection exercise for a project I wrapped up a bit ago, combined as an exercise to make Future Me's life a Better Place, I pulled together a simple Google Sheets workbook to make a quick 'calculator' and balancing mechanism to help keep track of a couple datasets. And in so doing, I again befriended a couple of super simple, and super powerful functions:

Read More

Count of AD Groups Ranked by Members

A cartoon/drawn group of random people

A week ago, someone on one of our more generalized Slack channels asked if anyone knew how to make AD Users and Computers (ADUC) filter mechanism rank output based on a group membership count. Now, I don't necessarily understand (or honestly, care) about the particular use case, but I knew the answer was going to be 'no, that can't be done by way of the GUI.' Which was the first part of my answer.

Read More

Powershell Exports AD Computers to CSV

Road sign reading "Export"

A couple months ago I wrote about using Powershell to find and export AD records for the purposes of our Windows 7 End-of-Life project. This post is effectively a second in a series of 'exporting computer records from AD with Powershell' if you will.

Read More

TRIM-ming up for Summer

Trimming a hedge with lawnmower attached to tractor loader

Not really TRIM-ming for summer, but taking the opportunity to briefly write about Rule #1 when dealing with unknown (or incoming) data.

Sanitize. Thy. Inputs.

Without going into great detail (as it doesn't matter at the end of the day), last week I encountered a vendor that apparently doesn't know how to do this very well. Or at all. What ultimately transpired is the complete failure of a reasonably-routine change process to capture a critical failure in production.

Read More

Interesting Log Entries (or, Why To Patch Thy Systems)

Random text scrolling from within a terminal window

So far in 2020, I've been keeping a closer eye on the logs of this Drupal site. Back in the day, I used to pore over logs in a sort of 'bender' fashion, presumably as I was bored or something similar. Rarely was something particularly interesting, but it was a good way to figure out and correct some random things. Still is...but it's 2020 and nobody manually looks at logs anymore.

Read More

Private Content in Drupal

Glass that turns opaque with an electric current.

When I started going down the Drupal road a year ago, with minor delay after delay after delay, one of the many 'dorky' things I wanted to do was port my old "Start Page" to a real platform. See, I've had this flat HTML "Start Page" on my desktop for well over a decade, and it's set as my primary browser homepage.

Read More

Low-Budget "CI/CD"

Dude with baseball bat smashes monitor off desk

A client project had a database server upgrade in early December, and as I eluded to in a different post from around that time, Git was the shit when it came to making my angle of that migration go smoothly. Past Me made Current Me's life a lot simpler.

Read More

Powershell to Find and Export AD Records

Frantically searching through report data

With the very near end of life for Windows 7, as we work through the last bit of known and managed machines to upgrade or replace I find myself needing to do more frequent "searches" of AD computer object records for analysis.

Read More

Cleaning Up and Updating

Suspense while waiting (to update).

I've been a bit remiss in the posting cadence lately (well, since Thanksgiving). Much has been happening in all realms of life (as they are want to be during the "holiday season"). That being said, I don't return to work, proper, until January 6. And so it's time to do some cleaning up and other updates. With any luck, I'll have some material queued up to help buffer the situations when I'm out of time (or random ideas).

Read More

Visual Customizations for Windows 10 in OSD

Windows logo

As we work through the tail-end of our Windows 7 fleet (January 14, 2020 is coming if you haven't heard...), I've found myself rolling a different type of hammer process for the last of the "upgrades." This past week as I was tweaking what amounts to an in-place update (by way of wipe and load) for Windows 7 to Windows 10, I was reminded of how Past Me was indeed awesome (and inspired) since this simple script with all the various background and image sizes still works in Windows 10 19XX deployments.

Read More

Tales From The 'Duh!' Archive: Command Syntax

Cartoon character pushes zombie back into grave

I had a very long week, which means I'm writing a short post this time around.

Among several seemingly disparate things I accomplished in the last week or so, I spent some time deploying applications via SCCM (soon to be called Microsoft Endpoint Manager/Configuation Manager/#MEMCM per the announcement at Ignite this week).

Read More

Let's Expand Encryption!

Gif of lock tumbler mechanism

This weekend I performed the quarterly actions to update my various letsencrypt certificates, which I've not written about since early May when I'd performed the first set of renewals. Let's Encrypt and SSL For Free are still outstanding services, and I'm super happy with them!

Read More

Who's Font Awesome?

Puppy pointing with text "Who's Awesome? You're Awesome!"

Earlier this year while working on a client project revision, I decided to spruce up the old and dated icon set. This set had been cobbled together from various sources over time (the way you did these things back in the day), and overall lacked a consistent use and/or feel. Some actions had no associated icon, so educated guesses were made to find a matching icon from the existing set...and so forth.

Ultimately, it was time. But where to start?!

Read More

Time for a Drupal Refresh

Old computer mainframe tape disks

So here we are...just over six months into the new Drupal adventure driving the site. Overall I'm much happier with the transition than I'd originally expected, because the general maintenance and upkeep has been pretty much automatic. Scheduled publishing has been a lifesaver, too, because it's a 'set and forget' thing...unless I cross a month's boundary between create and publish dates (more about that in a bit).

Read More

Collection Variables in SCCM Task Sequences

Hello my name is {X} tag

As I've mentioned a number of times in previous posts, on our campus we perform a roughly-annual refresh of multi-user workstations across the institution. This 'multi-user' scope includes machines in classrooms, computer labs, open learning spaces, conference rooms, and so forth.

Read More

Dynamically Created Anchor HREFs

Multiple Arows Crossing Paths

Back in the day, namely before Javascript and jQuery were really a thing, the idea of dynamically creating an anchor's HREF attribute required some serious magic and behind-the-scenes wizardry. Or something like Flash. Those were not the days...

A Bit of Background

Several years ago, during a client's web app rebuild/refresh, I decided to clean up some of the gnarly baggage behind their reporting mechanism.

Read More

What's That Join Again?

Visualization of SQL Joins
  • July 15, 2019
  • 2 minutes
  • tech, sql

In the interest of hopefully saving Future Me some time, I'm writing this little bit so as not to have to stumble to remember a simple premise:

How do I LEFT JOIN the same table more than once in a query?

For as many times as I've had to join a table more than once (effectively as a certain type of generic lookup table), you'd think I'd have this memorized. But I always get caught forgetting to proper alias both joins.

Read More

Auto-Determine Primary IP Address

IPv4 address representation in dotted-decimal notation

One of the things I've baked into our production task sequence for "multi-user devices" is a secondary way to automatically determine a device's use case while in the WinPE stage. The primary, preferred way to determine use case is by the use of SCCM collection variables, but those require a known object (in the proper collection) to function as designed. Thus, for all rebuilds of known devices, the use case is figured out by collection variable.

Read More

Batch Ship Data to Google Team Drive

Moving Data

A few weeks ago, I wrote a brief bit about capturing webcam images. This post expands on the initial process: specifically, what to do with the images once procured.

Read More

Capturing Your Internet-Connected Webcam Images

Puppet bird with binoculars

Over the years, we've had a few public Internet-connected cameras pointing at various places around campus. We've used them for publicity and other purposes since the mid-1990's, and starting in around 2010 would sometimes be called upon to create a sort of time-lapse video of activity from one of said cameras.

Read More

Windows Scheduled Tasks with Powershell

Mechanical Mathematical Calculator

As I struggled to find looked for inspiration for this week's post, I wound up looking within...oddly enough as I was reconfiguring my email out of office response (the below is what I had for my time at MMS):

Read More

MMS: Drinking From the Fire Hose

Drinking from the fire hose

I spent last week at MMSMOA, a conference I cannot recommend enough for anyone working in the Microsoft/Windows/Systems Management space. The main event, held at the Radisson Blu Mall of America, is a solid four-and-a-half days of deep technical material, networking, sharing, and more!

Read More

Hey, Let's Re-Encrypt!

HTTP vs. HTTPS

The time has come...to renew some Let's Encrypt SSL certificates! Doesn't seem like 90 days has passed since I originally wrote about trying out Let's Encrypt as a service to generate free, trusted SSL certificates with a limited lifespan (90 days versus the more commercially-focused 1-3 years).

Read More

Performance Can Matter

Performance Measure

I've had this written down as a topic suggestion for some time, and to balance/counter my post a couple weeks ago regarding performance, there's absolutely another side to that coin.

Read More

Does the Performance Matter?

Does it matter?

Back around 2015 or so, I wrote a simple Powershell script which basically re-populates Active Directory (AD) group membership based on data procured from our central systems. Two primary AD groups in particular are synchronized to our print management system, PaperCut, which pre-provisions accounts and access so folks handling monetary transactions don't have to create accounts, etc.

Read More

It's Presentation Season!

Wizardry

As I mentioned a month ago, I've taken the opportunity to commit to more speaking/presentation engagements than ever before, in an attempt to better inspire folks and do more technical evangelism. It just happens to be that I have three things lined up in as many months!

Read More

Auto-Transpose Data

Geeks and Repetitive Tasks Graph

Many years ago, an individual in our office retired and the position was not replaced. For several reasons, this was an appropriate decision: the landscape of IT and our localized service portfolio had, for lack of a better phrase, stabilized. Our team was more often innovating in ways involving or prioritizing partnerships over custom builds or infrastructure requirements. We were appropriately consuming centralized services made available as a commodity.

Read More

I Own You, Drupal View!

I Own You

As I tweeted about in victory a week ago, I managed to finally get my Drupal taxonomy term view(s) to do what I wanted:

Read More

Auto-Generate OSD Computer Name

Typos Happen

Last summer while re-designing and upgrading our primary task sequence for the "multi-user devices" in our fleet (computer labs, learning spaces, etc.), I decided to tackle what had become a bit of a perennial problem: device naming.

Read More

We Have Liftoff!

Hovering Cat

Liftoff.

Finally.

Aside from some style tweaks likely to come around, the underlying technical bits I've been ignoring or had on the list to address (looking at you, tag views) are now in place and working as I'd expect. There's a pesky bit I've ended up handling in a more manual sense, at least for the short term: content view by tags.

Read More

Hey, Let's Encrypt!

As I'd mentioned in the past, one of the key reasons for changing up my personal hosting plan was to support Let's Encrypt, the free and open Certificate Authority. In 2019, there is absolutely no need for a regular old website or service to pay some exorbitant rate for an SSL certificate. The premium options (extended validation and such) are an entirely different arena--think banking and other services--but those are out of scope for everyday Joe.

Read More

It's [Well Past] Transition Time

As the last full refresh of mzonline.com was fully thirteen years (!?!) ago, ca. 2006, one can say it was time for something new.

I'm super glad I had built the old site out with a tableless and (for its time) clean and well-structured design. While it's been a bit dated for several years, with the exception of the site itself not being terribly responsive (for mobile and alternate screen sizes) it's had a good run.

Read More

Past Speaking Engagements

I was a speaker at MMS Flamingo Edition, October 20-23, 2024!

MMS Flamingo Logo

I was a speaker at TCSMUG OSD Day, July 31, 2024!

Twin Cities Systems Management User Group (TCSMUG) Logo

I was a speaker at NWSCUG, July 19, 2024!

Northwest System Center User Group (NWSCUG) Logo

I was a speaker at MMSMOA, May 5-9, 2024!

MMS Logo

I was a speaker at BrainStorm K20 Wisconsin Dells, March 10-12, 2024!

Logo for BrainStorm EdTech Conference

I was a speaker at MMS Miami Beach, October 29-November 1, 2023

Image advertising MMS Miami Beach Edition